Plastic Models

Dragon Models Sd.Kfz.142 Stug III Ausf B in 1/72 scale

~ Colonel Mustard ~ 2 Comments

Another Stug for my collection from Dragon Models. This time I managed to buy from Dragon Models USA for some super duper bargain price. Keep a look out for their specials as sometimes they do have really good ones. Even with the pricey freight USA to Australia its worth it.

The kit is really simple as Dragon are now releasing these small scale kits with running gear and tracks in single sections. So each side of the tracks include the lower wheels and upper return rollers and fit over the sprocket and drive wheel. This reduces the parts drastically but I still have trouble fitting the tracks and managed to snap off one of the wheels. Lucky I now have a fantastic pin vice and mini drill bits. So a new metal axle was added to the back wheels far stronger than the original plastic one. So fitting the tracks after that was a breeze. I just use some thicker wire superglued into the wheel and then into the lower hull at the right spot. You just need to drill corresponding holes where the wire fits. Anyway a great investment go get a pin vice, I think I paid about $15 for mine. What a life saver!!!

The rest of the kit was very straight forward. The Stug is a simple looking tank and so a simple model. All the hatches are moulded shut on this one and the hull details also mostly moulded on. So a great kit for someone who wants a fast easy build, but if you want a challenge I think Trumpeter make lots of Stug versions that are more interesting.

I tried a green and brown camo scheme just kind of blotchy patchy random. I did go back afterwards and respray with dark yellow to fade out my painting, a technique which seems to work well. A new aerial was added using my washing up brush aerials and a whole heap of stowage to the back to make things a bit more exciting. I also built a Revell Stug at the same time, so he is up next. The last photo shows all my Stugs, one Trumpeter kit and now three from Dragon. They are cool little tanks.

Armourfast Hanomag Halftracks in 1/72 scale

~ Colonel Mustard ~ 5 Comments

I finished up a couple more halftracks from Armourfast. These come two in a box and are really reasonably priced. But they do lack detail, especially in the one piece track and wheel area. But if you want some good value vehicles to bulk up the numbers then look no further. They go together in minutes and you can always dress them up with extras and crew.

So that’s what I did with these two. I had a spare Pak 36 gun from somewhere which I added to the top of one vehicle (I think it was a Plastic Soldier Company spare I had). This was teamed up with some Zvezda crew men from their 88mm gun kit. On reflection I would change the position of the crew as it looks a bit like they are doing a loading conga in the back of the half track. For the other vehicle I used my favourite AB figures for the crew, including a machine gunner and a couple of seated guys. Spent way too long doing the camo schemes again but it’s a fun past time.

I tried something new with my camouflage on the half tracks by first painting the green pattern in dark green with a brush, but then giving them a fine respray with my dunkelb spray can. It fades the camo quite nicely. Since I refuse to think about an airbrush this is as far as I will go without breaking my own strict modelling rules of engagement!

 

MACO sWS Amoured Cab Variant Half-Track in 1/72 scale

~ Colonel Mustard ~ 4 Comments

Sadly this model kit maker, I think from Germany, has stopped producing these kits anymore. So you’re only chance of picking one up is on eBay or some similar shop somewhere. I was lucky enough to grab four different MACO kits on eBay a while ago. There are really cool half tracks and some excellent anti aircraft vehicles too.

So I was itching to build one of these and picked out the sWS cargo halftrack to begin. My first observation is that it is a massive vehicle. I think a good metre or longer than the 251 series half tracks. The kit parts are amazing, delicate and detailed. The tracks are link and length and are probably the best tracks I have found so far in a small scale kit. I tend to glue the single links together and create a curve slowly before attempting to add them to the sprocket wheel. This worked well with this kit. The tracks are so nice and thin they bend easily to the running gear. Inside the cabin there is also a good amount of detail, and you could add your own driver or crew member if you wanted to. The roof hatch can also be modelled open. I left mine closed and didn’t add any crew. This is a fab little kit. I cannot wait to try out the other ones I have in my stash. Painting was just the usual dunkelb followed by a brown wash over gloss varnish. The tracks were base coated in german dark grey and then rusted with powders. I did quite a lot of sponge chipping and wearing using black, raw umber and red oxide. I may have slightly over done this part so my cargo half track does look like he has transported a lot of cargo. The only decals to add were number plates on the front and back. To finish it all off i added plenty of earth and sand powders.

All I can say if you can find a MACO kit anywhere you should buy at least one just to check them out. I hope maybe someone will pick up production again as they really are top notch.

Airfix Bofors 40mm gun and tractor

~ Colonel Mustard ~ 9 Comments

Another trip down memory lane with this Airfix kit. I had this as a teenager and was built and played with unpainted and I am sure ended up significantly damaged probably to the point of total destruction. The kit is advertised as 1/76 but seems to fit in perfectly well with all my other stuff and certainly does not seem small.

It’s an Airfix kit that still stands the test of time and was really fun to build. I love the tractor as its quite a unique vehicle that you cannot find anywhere else but this kit. It’s a nice easy build and there were no issues whatsoever, something you cannot always say about old Airfix kits. The only thing i can really criticise is the crew and driver supplied which are all poor figures and need to be replaced. So i turned as usual to AB figures who produce an excellent Bofors crew, plus an extra driver. These guys fit very nicely and are a great improvement on the original plastic rubbish.

I found this kit on eBay for pennies, which is a great place for finding old Airfix kits, often for under $10 a pop. My copy looked like it was from the 1980s so i was surprised that the decals actually worked. My personal favourite is the RAF circular symbol that you can slap on the tractor roof to avoid any untoward friendly fire.

I added plenty of muddy weathering powders to everything creating quite a dusty looking combo. I also modelled the gun in firing position but also kind of towing still so it looks OK either way in a game. I didn’t feel like building two kits, one for towing and one for firing. I also picked up an old Esci 25 per to go with a box of Plastic Soldier Company 25 pars to make up an artillery regiment. Might do that next!

Plastic Soldier Company 1/72nd British 6 pdr anti tank gun and Loyd carrier tow

~ Colonel Mustard ~ 4 Comments

I finished off my Plastic Soldier Company 6 pounder anti tank guns to go with the Loyd carriers I completed a couple of posts ago. This really is an excellent box of models. You get two carriers, two guns and a total of twelve crew and plenty of shells, boxes and shell casings. The guns are simple but detailed little kits so go together very quickly. There are enough different poses of crew that you can use some or all of them and make up your own group.

I painted the crew and the gun separately with my usual British colours and mounted them on a square of 3mm MDF. The base was covered in modelling clay and then given a coating of find sand for texture. I painted the 6 pdr shells separately too before gluing them into the hands of the crew. This was much easier than trying to paint them already glued on. Once the gun was painted and glued to the base I added the crew men and some other bits and pieces to add a bit of variety. Some dusty powders were added to the gun wheels and the base in general. To finish off the base I added some flock and tufts of grass.

I can highly recommend these kits from PSC and they are an essential part of any British unit. I took a few pictures of the guns plus added in their Loyd carriers for one more picture too. Colonel M.

 

Roden 1/72 German Sd Kfz 231 Eight Wheeled Armored Car

~ Colonel Mustard ~ 2 Comments

 

 

 

 

 

 

 

Another German vehicle finished this week, but this time one of their excellent eight wheeled armoured cars. This kit is from Roden, who do a good range of all the eight wheeled armoured cars and other lesser known vehicles. I bought this one from my friends at Metro Hobbies. Its a funny looking vehicle but will come in very handy for reconnaissance and scouting missions.

The kit is fun to build with most of the challenge coming in building the under carriage. The wheels and axles and suspension are done in this soft black plastic which I found quite tricky to work with. I manage to snap one axle without much effort, and found it difficult to get the wheel alignment nice and straight. Four wheels each side means there is a fair bit of aligning to do. Apart from that I lost a light to the carpet monster and struggled a little with the mirrors and other bits on the hull.

On reflection I think I should have painted this German grey and then done some highlighting to try and pick out more of the details on the vehicle. Doing a green camo stripe type thing seems to lose a lot of the detail and leaves him looking a bit boxy and flat. Anyway I have two more versions of this eight wheeler in the box so next time I will try something different.

Apologies for the fuzzy photos, blame my crappy camera phone……….

 

 

Dragon Models 1/72 StuG.III Ausf.F

~ Colonel Mustard ~ 4 Comments

I completed another Dragon StuG kit this week. It coincided with another delivery from Dragon Models in the USA. I have found them a great source for cheaper Dragon kits and if you buy three or four kits the postage from the US to Australia is only USD 12. Great value I think. They always have discounted kits and promotions on their website, so its well worth checking out. You can usually find stuff at USD 8-10 per kit which is a bargain I think for Dragon Kits. Have a look at Dragon Models USA

So onto my latest StuG kit. Its one of the new Dragon quick build models, so very easy to put together. The tracks are one piece affairs which fit around the sprocket and drive wheels. The whole kit has minimal pieces, and being a turret less tank, even fewer than normal. I still feel a little disappointed with such an easy, fast build for a Dragon kit, but the end result is still a very nicely detailed vehicle. I guess I was happy to spend more time on the painting and decorating this time. If you can find these type of kits for less than USD 10 then I think its good value. If you want a more complicated and challenging model I would be buying Trumpeter or Unimodel versions.

I kept this one a plain dunkelb yellow, but tried out some more chipping affects with a sponge. I used a black, a brown and a rust colour, and ended up overdoing the chips. I think its very easy to over do it. So I painted over some of the panels with more dunkelb and it seemed to fix the problem. Every where I read that with chipping and scratching less is always more! I think I proved a point. Lots of mud and dirt and dust with various powders and pastes was added. I then lined up my new StuG with two other friends (one a Trumpeter kit and the other another Dragon). Nice looking unit read for action.

 

 

 

Dragon Models Pz.Kpfw.IV Ausf.F2 (G) in 1/72 scale

~ Colonel Mustard ~ 1 Comment

Dragon Models in the USA had a 40% off sale back on Superbowl Sunday and I could not resist picking up some more kits with such a big discount! Some German big cats that came out at USD 6 a kit with such a decent discount. If you buy four kits from the USA the shipping is still only USD 18 total to Australia so it ended up being a great shopping deal. Now Dragon kits are usually a treat for me as you can pay more for them but it’s worth it as the complexity and detail can be considerably better than other model producers. This particular kit Dragon have aimed at simplifying everything, and its a bit of a disappointment to be honest.

They have started doing the wheels and tracks as one piece parts that you just add onto the lower hull onto the drive and sprocket wheels. The number of parts has been drastically reduced so the model can be built in really quick time. So they are definitely aiming for more of a wargamers’ market I think. The detail is nice but its all moulded on. The Panzer IV is a simple tank anyway, so I found this build a bit easy and the tank came out really plain. As a direct comparison I had just finished my Hasegawa Jagdpanzer kit which was much more of a challenge and had far better detail.

You can see I have put my Dragon Panzer next to my other Panzer IVs to complete the troop. The other kits are two Armourfast and one Esci. There is no difference between the Dragon Kit and the Armourfast ones, except perhaps the track and wheel detail is better on the Dragon one. The Esci kit is a real pain to build (for pain read challenge), but in hindsight comes out the best, with its cool side skirts and extra armour. Pricewise I would only be buying this Dragon kit if you can find a super deal at USD 6-8 per kit, otherwise you may as well just buy cheaper quick build kits from Armourfast or Plastic Soldier Company.

Photos follow with the Dragon kit on its own, plus hanging out with his troop buddies. The other Panzer IV kits are detailed in other posts on my blog. I think I will try a Hasegawa Panzer IV next and maybe get another Esci/Italeri one just for the hell of it!

 

 

Extra Foliage Branches Camouflage for tanks

~ Colonel Mustard ~ 3 Comments

I wanted to create some extra foliage branches to cover up my German armour. It was a common practice where tank crews would cut branches and drape them and tie them onto their armoured vehicles. Using small bits of lichen I just dipped them into some PVA and then flocked using various different greens. A spray with some varnish kept the whole thing together. Rather than glue these onto my vehicle (in this case my latest Jagdpanzer) I just rested them on there so I can choose to camo up or not! I think they came out quite well and will definitely keep the assault gun under cover behind some tasty bocage. I made plenty of these extra foliage branches so I can use them on whole units. My troop of Panzer IVs were just completed and will be blogged next up with and without extra camo.

Hasegawa 1/72 Sd.kfz 162 Jagdpanzer IV L/48 Late Version

~ Colonel Mustard ~ 6 Comments

Continuing my German armour building plans i got my hands on this Jagdpanzer kit from Hasegawa. Again the best Japanese on line hobby shop have this at a great price compared to everywhere else, especially for those of us in Australia! Hasegawa kits just keep surprising me, each new one I build, the more I like them!

https://ssli.ebayimg.com/images/g/HBMAAOSwYHxWHFsB/s-l640.jpg

The Jagdpanzer is another German tank destroyer that i am not sure was used too much in Normandy. I am guessing it was used more on the Eastern front, but i could be wrong. Anyway i wanted to build one and i am sure it will be happy to fit in with my Stugs and Hetzers. The kit comes in the usual Hasegawa grey plastic which is really easy to cut and glue. Wheels are simple and go straight onto the bottom hull. Eight along the bottom and then four return rollers on the top. You need to make sure you keep the lower hull and upper hull separate before painting them and after painting the tracks. The tracks need to go onto the lower hull before gluing the two together otherwise it will be very tricky to get them on. The tracks are the one piece rubbery type so give them a good stretch to make sure they fit OK without straining on the drive and sprocket wheels. You do not want to snap anything off……

The upper hull is pretty straightforward but it does not miss any detail. You have to open a couple of holes and also fill a couple of others. On the front of the hull there is one bigger area to fill which i made a total pigs ear of. I made such a mess with my filler and sanding i had to cover it up with extra track. Great way to cover my mistakes! I also added some more track along the front and the usual washing up brush plastic bristle aerial. If you haven’t tried that yet i suggest getting a $2 washing up brush from Woolworths with plastic bristles. Hey presto, 200 plastic aerials! I was super impressed with the detail and the challenge of this kit. Hatches can be open or closed, and I have a commander in the painting queue soon to be added.

Painting started with an undercoat of matt black followed by dunkelb dark yellow. Then i did a red brown and bright green camo pattern. Gloss varnish, followed by decals and dark brown wash and finally some chipping using a sponge. Its the usual process but i was happy how it all came out. I had also based the tank on 3mm mdf as usual. After a coat or three of matt varnish i used mud, dirt and various weathering powders to create the final dirty finish. The base was completed with tufts and flock and a little static grass.

This kit is excellent and a great balance between a challenging build without being frustrating. For a wargamer i do not think you will find a better version of this tank. I also made some camouflage foliage for the crew to further hide their vehicle so I will detail them in my next post.