Wargaming in 20mm

HaT Industrie British Mortars in 1/72 scale

~ Colonel Mustard ~ 3 Comments

I finally got around to painting up some mortar teams for my British Army units for Normandy. These plastic figures are great value as you get 4 complete mortars and a whole bunch of crew, radio operators and officers with binoculars. I think for under $10 a box (i picked mine up from Hannants on line) they will make an excellent mortar battery for your infantry company.

Image result for hat british mortars

It means that you can vary your set up with each mortar and make each base a little different. The detail is not that great, but, in plastic, and for that price you cant do much better. I think other metal manufacturers will do a sharper job but you will pay lots more. The facial detail is particularly lacking and you end up almost painting features on some of them which isn’t ideal. I based my guys on MDF as usual and mixed up the poses to create four different scenes. Another blogger had given me a good tip for using gauze or crepe bandage as camo netting, so i applied some to the helmets of some of my mortar crew. A few highlights and they look pretty good. Also with my new magnifying glass i was able to paint some maps as the spotter checks his coordinates. I also added some boxes and bits and pieces. Happy the way they came out and i always prefer to have my mortars on the board. I used an officer and a radio man as the forward observer. The only thing i may change is the plastic radio aerial which is way too thick.

Below are some photos of my finished teams. Also i based my Revell Tiger tank and did some more weathering and dirt. He is in there somewhere with his buddy the Zvezda Tiger.

 

 

Esci Kubelwagens and Airfix SdKfz.222

~ Colonel Mustard ~ Leave a comment

A while back i bought two of these Airfix German Reconnaissance sets from Hannants, mainly because they were on sale and a bargain too good to be missed. Even though they were listed as 1/76 scale i thought i could fit them in somehow. On opening up and building these little models i realised that the Kubelwagen included was just so tiny and a really bad looking model that i could not use it after it. The SdKfz.222 is a very average kit but once he is painted up he is passable. Luckily i have a couple of Dragon small armoured cars i will be building soon which will probably replace this guy.

Airfix A02312 1/76 Scale Model Kit - WW2 GERMAN RECONNAISSANCE SET

So i still needed Kubelwagens for my officers and forward observers. I soon found some Esci Kubelwagens on sale at Lucky Model in Hong Kong and picked up three boxes of them for bugger all, and you get two vehicles per box which is a bonus. Super easy to build and so much better than the Airfix version. They are only a few parts, which is not a surprise being a little car really, and can be modelled with their canvas roof fully up or totally retracted. I wanted to see my occupants so kept the roofs down in both my builds. You get a few decals too which is nice, but i ended up using my Airfix ones instead. I gave them a two colour stripey camo scheme over the usual dunkelb base coat.

One Kubelwagen is transporting a couple of very important generals while the other has a forward observer unit. The dude in the front has his radio headphones on (Bose wireless i think) and the guy in the back is at the ready with his MP40 and his feet on the seats. Figures are all from the great AB Figures and fit beautifully. Although i did have to glue the front seats back a bit in one so the long legs of the front occupants would fit. You could cut their feet off i guess but how will they drive without any feet….

 

 

 

 

 

Revell PzKpfw VI Tiger Ausf E in 1/72 scale

~ Colonel Mustard ~ Leave a comment

My second Tiger tank build this time from Revell, after having a mixed experience with the snap together Zvezda kit a few months ago. Revell make really nice kits and this Tiger is no exception.

It’s a really easy kit to build with most of the parts being in the tracks. I managed to make a mess and misread the instructions and get the tracks on the wrong side. After completing nearly one whole side i had to take them all off again and in the process had to sling a few track links. This meant that i didn’t have enough links for the turret tracks which had to be replaced by some spare metal Panther tracks i had…. So that was the only tricky bit and mainly to do with my own lack of focus!

The whole kit goes together really nicely and easily with great detail. I think you can model the commander’s hatch open if you like. Kit comes with a few decals, only a couple of turret number options, but that will do. This Tiger is super solid, only the turret MG is delicate, so i did not see the need for a base. I just went with a plain dunkelb paint job, mainly as i was tired of painting camo schemes and needed a break! I need a couple more Tigers to make up my troop so next will try a Trumpeter version and might spend a bit more money on a Dragon kit too…….

Here is my Tiger wandering the lanes and fields of Normandy.

Normandy Bocage in 1/72 scale

~ Colonel Mustard ~ 2 Comments

I was on the verge of getting a game set up to play over Christmas while i had a few days away from work. But then i was hit with a wave of dissatisfaction like a seven year old opening a really shitty present on Christmas day. My Normandy bocage sections were just not up to scratch. I had to do something about it. I keep looking at Pat’s blog Wargaming With A Silver Whistle and having feelings of inadequacy! Anyway, armed with sections of MDF, rubber matting, poly fiber stuffing, acrylic sealant, coconut fibre, and lots of flock i set about redoing my bocage.

I have a rubber mat that’s about 2cm thick and meant to be used for camping or something, but works well cut up and glued to MDF strips roughly 3cm wide by 10-15cm long, as the base for my bocage banks. I make sure the rubber is a good 0.5cm thinner on each side than its MDF base. I then blend the bank into the base using acrylic sealant or crack filler, but you could use modelling clay or anything else really. When the sealant is dry i give it a good covering in PVA glue and then chuck a heap of sandy dirty gravel on it from out the front of our house. When that’s dry its a heavy spray of dark brown paint from cans i pick up from Bunnings for a few bucks.

The actual bushes are made from a mix of coconut fibre (also from Bunnings for next to nothing) and that poly fibre people use to stuff toys and cushions and probably dead animals. Again very cheap, my wife bought me a bag from Spotlight for about $5 and i will be dead long before i finish the bag. Maybe i can be stuffed with poly fibre. I jam bits of cocktail sticks into the rubber matting top of my bank and that supports the bushes. Lots of PVA again and then get lots of bush material onto the bank. I tried to vary the height as much as possible, but by all reports bocage was anywhere from 5 – 7m tall so i reckon 5 – 7cm is good for 1/72 scale. When the bushes are dry they get another good brown spray.

The last bit is the fun bit when i am throwing lots of glue onto the bushes and then dunking them into a two colour mix of flock (a mid green and a dark green). I use coarse flock from a Vietnamese company called MP Scenery. Its probably the only part of this terrain that costs any significant dollars. I flocked the base too with some finer stuff, and did a bit of lighter brown dry brushing too just to finish things off.

It all came out a lot better than my last attempt, you can see below with the doormat wheat fields and the carpet tile crops. Inexpensive and i think just as effective as anything you can buy. Maybe i can get to play a game now…… Happy New Year!

The Plastic Soldier Company Churchill Tanks in 1/72 Scale

~ Colonel Mustard ~ 2 Comments

One of the most distinctive and original tanks of World War Two and one of my personal favourites please meet Mr Churchill. Choices to build Churchills in 1/72 scale are quite limited. You can have a go at the old Airfix in 1/76 scale, but that kit is really out of date and probably worth avoiding. Your only other choices are the Italeri model which seems to be very hard to find or a Dragon version or two, which usually end up being overpriced.

So great news that the Plastic Soldier Company have a two tank box of Churchills. You get the option to build four different versions, basically by giving you four different gun barrels. I went with the 75mm and the 105mm support gun. Value wise they are definitely better than buying two Dragon kits. They are just great little models, awesome chunky detail, they really capture the essence of these super cool tanks. As always with Plastic Soldier Kits they are easy to put together, so it doesn’t take long before you can get them into the action. You get some extra track to add on to the sides and the turret plus a commander figure if you want to leave the hatches open. Would be nice to have two different commanders to mix things up.

Painting was easy. A black undercoat, followed by an olive drab top coat. Then a black/brown wash and an olive drab highlight. I used some Plastic Soldier Company decals plus some Airfix numbers i found that looked good down the side of the vehicles. Some dark brown and light brown muddy bits finished him off. Check out my photos below. You can also see the comparison to my other Dragon Churchill in one of the pictures. I think if you need Churchills get a couple of boxes of these, they are better than anything else out there!

Pegasus Waffen SS Set 1 Part 2

~ Colonel Mustard ~ 8 Comments

 

Well it’s nice to get back to my dining room table and finish some stuff off. These figures by Pegasus have been hanging around for weeks as i struggle with painting German camouflage schemes on tiny dudes! I painted around ten of them a few months back but needed to finish off the rest of the platoon. They really are nice figures and i think probably the best Germans you will find in plastic. Lots of great detail, and numerous different, useful and realistic poses. Quality wise they are on a par with the better metal figures out there. These are great value for money when you compare to their metal brothers. I also have Set 2 in my treasure trove out the back, so will crack on with that when i get the chance.

Mounting plastic onto 10 cent pieces gives them some weight that i like on the table. Less chance of them taking an impromptu nap while on the job. I used an olive green base with camo brown and dark green splotches, then followed up with further contrasting dots of all three colours. It’s a real pain in the ass, and takes me hours to do, but i kind of like how these guys turned out in the end. Probably worth the effort, although my eyeballs may disagree. Its not oak leaf, its not pea dot, i am not really sure what it is, but it looks good enough for me.

The lads below have just jumped out of the Opel Blitz trucks (Pegasus again) at a dodgy looking bridge, which could be primed for an ambush…. Better be safe than sorry and lob a few grenades in there first. If nothing else you may catch a few fish.

The Plastic Soldier Company

~ Colonel Mustard ~ Leave a comment

Colonel Mustard is still on the road and so reports are a little different in nature while he is a few thousand miles from his dining room table!

I have the good luck to have a brother and a sister who live within 10 miles of Henfield, where the excellent Plastic Soldier Company have their HQ and distribution centre. So a quick email to Will the commander in chief allowed me to drop in and visit. I really needed some Sherman Fireflies for my British, and with only Armourfast offering an average looking model, i knew Will would have the best tanks for my requirements.

Its like one big candy store for the WW2 modeller. Tanks and vehicles line the shelves and order after order are loaded into boxes. Will was extremely friendly showing me around. If i had more luggage space i would have picked up more than my box of Fireflies.  Now i cant wait to get home and get cracking. Although i do have some PSC Churchills and Universal Carriers to get started on too.

So if you are in the vicinity of Henfield i highly recommend dropping into PSC HQ, with prior warning of course, oh and some cash in hand for some super goodies.

“Painting Wargaming Figures” by Javier Gomez

~ Colonel Mustard ~ Leave a comment

I had read a few very favourable reviews of this book and had to grab a copy for myself. I am old school, well actually i am just old, so by definition old school i guess, so i like having books to read rather than just whizzing through pages on the internet. Its the same with music, i still buy CDs and really don’t like downloading stuff. It’s a hangover from owning vinyl records as a child. So much more fun to have the covers and the sleeves and the words. Anyway this book turns up on my doorstep and it certainly did not disappoint.

Mr Gomez details every aspect of miniature painting in a very clear and concise manner. He covers every technique you could require, all backed up by many examples, and step by step guides. All the text is accompanied by some excellent photographs of his hand painted figures. If you want to improve your painting skills and get inspired then this is an essential book to add to your library. What i liked was the comprehensive coverage of pretty much any colour, texture or figure. If you need some tips or advice its all right here. Aimed mainly at 28mm figure painting and the earlier historical periods such as Ancients and Napoleonic, it still easily translates into other scales and periods. Even though i am heavily entrenched in WW2 20mm gaming i still found the whole book a very useful and worthwhile purchase.

You should charge out like the light brigade and grab yourself a copy!

Image result for painting miniature wargames figures

Unimodel M36 Tank Destroyer in 1/72 scale

~ Colonel Mustard ~ Leave a comment

I actually got the next bit all wrong. What i really wanted was an Achilles Tank Destroyer for my British forces in Normandy. What i managed to buy was an M36 Tank Destroyer which i don’t think was even used by the Brits much. Anyway it was too late once i had clicked the order button on my favourite Ukrainian model store’s web site, and soon a couple of M36 kits were on the way across Asia towards Australia. For a wargamer looking for an Achilles or any other M10/M36 variant 1/72 scale in plastic, the options are very few and far between. In fact i am not sure there are any other manufacturers out there who make versions of this tank in plastic.

But who cares i really liked this kit. The more Unimodel kits i build the more i like them. The link and length tracks work well and the bogey wheels all look great. The kit comes with some excellent photo etched details, which although fiddly, really add to the detailed look of the vehicle. I did struggle a bit with getting the headlight protectors looking right, but nothing wrong with a bit of a challenge! The two piece turret needed some extra sanding and work to fit together and also to fit into the hull. Plus the contents of the turret were also a bit tricky and needed some special handling. But it all worked out in the end. There are some excellent pioneer tools to add onto the back, which makes a nice change to the boring moulded on type deal. I also added some rolled up tarps on the roof. The 50 cal Machine Gun looks good on the open turret, and i will be adding some crew men at some point too to finish the whole thing off.

To add to my confusion i kind of mixed up some British insignia on the tank with some US stars that were supplied with the kit. I like the white and yellow stars on Allied tanks, and i didn’t think anyone would object to my decal mixtures. Hey he can fight for the US or the British forces. Win win i say. Check out the photos below!

Pork Chop Hill

~ Colonel Mustard ~ Leave a comment

Nothing to do with the actual battle of Pork Chop Hill, i just liked the idea of calling a post that. But it does have everything to do with hills, and the construction of one. In the good old days (for me that’s the early 1980’s when Adam and the Ants and Duran Duran were wearing frilly shirts) my hills were books placed under random green blankets. These days my green mat is a massive improvement on the old blanket or the green painted ping pong table. But its too rigid to place items under it to create any hills or undulations on my wargaming table. After plenty of research and investigation i decided to have a go at constructing my own hills. This method is nothing new and all sorts of tutorials can be found on the net, but for a balance between value, visual effect and simplicity of construction i don’t think you can beat it!

I bought some polystyrene sheets 25mm thick from my art shop for a couple of bucks, plus some 3mm MDF from Bunnings, again a very cheap material. I cut out my required shape from the MDF, in this case just a simple oval shape. I then glued the polystyrene sheet to the MDF shape with PVA glue and left it weighted down overnight to dry. I reckon you can use any kind of polystyrene or insulation foam or similar. Once it was dry i cut the hill edge level with the MDF base, and then gave it a good sand with sandpaper until the contours were where i wanted them. Make sure you sand this stuff outside so you don’t inhale any nasties. That’s pretty much it. I gave the hill a thick coat of a cheap dark brown acrylic paint and then gave it a liberal coating of green flock. The flock i had is a close enough match to my green mat, well good enough for me anyway. I was pretty happy how the whole thing came out. Now i can make a bunch more of different shapes and heights to cover all situations. I am also going to make a big hill in two halves so it can be one big hill or two smaller ones that sit flush with the edge of the table. I also think grabbing some cork from the pet store and making a hill with a cliff will be a cool idea.

Check out the naked hill below and then the finished result!

IMAG0133