I continued working through my backlog of German vehicles and troops. My buddy Jim from Combat HQ had mentioned German hanomags so i thought i would finish off a Hasegawa kit i had lying around. I have already reviewed this kit in a previous post, but this time wanted to put some grenadiers in the back making a fight of it. The kit itself is a good one, simple to build but more detailed than anything the Plastic Soldier Company do. The only poor thing about is the funny ribber tracks which are a bit crap. If i had some spares i would swap them.

The more exciting bit was choosing the crew and how they would fit in the back. I used some awesome AB figures as usual. This particular pack was made for fighting out of a half track. I also cut the top half off an Esci/Italeri side car machine gunner and glued him to someone else’s standing legs. He makes a nice cap wearing machine gunner at the front. For their camo i tried using a dark yellow instead of a light brown on one round of dots. This worked out well as it provides a better contrast to the other colours. I find with any German SS camo scheme i am doing it does not really matter which three colours i use. A base coat of green or khaki, with darker brown/black patches and red brown patches works nicely. Followed by layers of dots of lighter shades on the darker patches and darker dots on the lighter patches all work well. Its the contrasting colours that create the effect. From my research the range of colours and patterns was so wide it you can basically do whatever you like and it will turn out OK.

Following photos of my finished half track, plus him as part of a Panzer Grenadier unit with other half  tracks, a Kubelwagen and a Marder as support.

I am really enjoying building these Unimodel kits. They have a huge range covering loads of World War 2 vehicles, some of which are a bit more obscure. I pick these up directly from an excellent Ukrainian Hobby shop which stocks pretty much the whole range. You can find them at https://www.hobby.dn.ua. Its far better to buy these kits direct from Ukraine as they work out at much better value. Postage from Ukraine to Australia is very reasonable too. Anyway check them out. I did pick up some Hetzers and a Sherman at the same time, which are next in line for building.

This Marder III is another of the German Self Propelled guns they came up with and its a pretty funny looking design. They just used the same chassis at the PzKpfw 38 Light Tank and jammed an AT gun on top. The hull and running gear are quite easy to build with four big wheels either side plus sprocket and drive wheel. The tracks are link and length and fitted really nicely. I always start with getting the sprocket wheel done first, but in this case it didn’t matter as the tracks all lined up perfectly.

The armour sections on the upper hull were a little bit tricky as the instructions tend to be a bit vague. Unimodel tend to include a little too many steps in their exploded diagrams so it can be hard to follow. Once i had fitted all the upper armour sections i found that the top rail would not fit across so i had to add an extra bit of plastic. No harm done. But the armour plate was the trickiest part of this model. You get some photo etched metal bits too. The basket at the back is metal you need to bend plus some other little bits here and there. Overall this was a lot of fun to build and a bit more challenging than the usual tank.

It doesn’t come with any crew, and for an open topped vehicle its crucial to have some crew hanging around doing their thing. I used AB Figures tank crew as usual. I had a lot of fun doing a peadot camo on their pants so i included a photo of them in mid paint under the magnifying glass light. The tank i tried a new camo scheme with green patches out lined in red brown. The kit comes with plenty of decals giving you options to do whatever you want. I liked this kit so much i immediately started work on one of the Unimodel Hetzers i also bought……

I bought this kit from Hobby Easy in Hong Kong for an amazing $8.50 which was just too good to pass up. Also my buddy Jim Bambra who makes excellent wargaming rules at Combat HQ wanted some photos of an Elefant (not the big eared type), so i happily obliged with my build of this interesting tank.

The more i build Trumpeter kits the more i like them. Enough detail for a bit of a challenge, but all the bits go together nicely without too much screwing around. I hate messing around with ill fitting parts. It’s no fun! This kit is great. A few little things should be mentioned. The instructions are not correct for the running gear assembly, so you really need to pay attention to the pictures and not the instructions to make sure you get the right wheels and the right suspension in the right places. Also there were two little spikey bits that go behind the sprocket wheels that i could not get into the right place and so i left them out. It didn’t matter as you cannot see them anyway in the final model. I did get some photo etched grills and stuff but they did not appear in the instructions and seem to have some from another version or something.

There are two options for the tracks. You can use the single piece rubber/vinyl or you can build the link and length type. I could not see how you could attach the link and length easily on the wheels unless you did them much earlier in the build than the instructions suggested. So i went for the single length tracks and they worked out fine.

All the hatches are moulded shut which is a shame, but i guess you could open them up with some knife work. It would be good to put a commander in there somewhere. I did a a two colour paint job, just yellow and green patches. Plus lots of dirt and mud and dust as usual. Its a cool kit and a cool looking tank. Much fun.