20mm Terrain

IBG Models 1/72 Chevrolet C15A No.11 Cab Personnel Lorry

~ Colonel Mustard ~ Leave a comment

IBG Models are a Polish model company that make a smallish range of 1/72 scale vehicles mainly for the Allies. Some British and American trucks and carriers. You can buy them direct from the company in Poland, which is probably the cheapest option, or if you are like me you can get them at around AUD $20 per kit from good Australian stores like BNA Model World.

What can i say, you pay a bit more for these kits, but they are worth it. This Chevy truck was a pleasure to build. There isn’t much more for me to say! IBG make three or four versions of the same truck, plus some British Bedfords and Universal carriers. They have some good looking American trucks too which i am definitely going to try. For your Allied army transport needs do not look any further than this!

In the back of mine i put some crates and stuff and a few British Tank Riders from HaT. Same with the driver who is a cut down HaT figure. When i get some more of these i will try putting some relaxed Tommies from AB Figures who have just the right poses lounging around in the back….

The paint job was a simple olive drab and some dirt. Good decals are supplied. No arguments here this was a great model to build and i would recommend it to everyone!

 

River Sections and Rustic Bridge

~ Colonel Mustard ~ 1 Comment

Finished some river sections and a rural bridge this week. The river sections all made with 3mm MDF cut to shape. I then added modelling clay river banks. The banks were then sealed in with a coating of acrylic filler, and then coated with a thick layer of sand and PVA glue. Some bigger gravelly bits were glued close to the waters edge. The water itself is just blue and green spray paints, the photos are actually a bit brighter than real life. The banks were sprayed brown then dry brushed with a lighter shade of brown and then flocked with a  couple of greens. I added some reeds made out of an old cut up paintbrush which came out OK.

My bridge was scratch built using foam board covered with embossed plasticard. Details were added with modelling clay. The road way was just cardboard bent and glued in place. Painting involved various different colours including grey, light brown, sandy yellow and pink.

The river sections were all 15 cm wide and from 30 – 40cm long. I need to make some shorter bits and also some more 45 and 90 degree turns for variety. Photos below!

20160102_100001[1] 20160102_100023[1] 20160102_100058[1]20160102_10023320160102_100140