German Armour

MACO sWS Amoured Cab Variant Half-Track in 1/72 scale

~ Colonel Mustard ~ 4 Comments

Sadly this model kit maker, I think from Germany, has stopped producing these kits anymore. So you’re only chance of picking one up is on eBay or some similar shop somewhere. I was lucky enough to grab four different MACO kits on eBay a while ago. There are really cool half tracks and some excellent anti aircraft vehicles too.

So I was itching to build one of these and picked out the sWS cargo halftrack to begin. My first observation is that it is a massive vehicle. I think a good metre or longer than the 251 series half tracks. The kit parts are amazing, delicate and detailed. The tracks are link and length and are probably the best tracks I have found so far in a small scale kit. I tend to glue the single links together and create a curve slowly before attempting to add them to the sprocket wheel. This worked well with this kit. The tracks are so nice and thin they bend easily to the running gear. Inside the cabin there is also a good amount of detail, and you could add your own driver or crew member if you wanted to. The roof hatch can also be modelled open. I left mine closed and didn’t add any crew. This is a fab little kit. I cannot wait to try out the other ones I have in my stash. Painting was just the usual dunkelb followed by a brown wash over gloss varnish. The tracks were base coated in german dark grey and then rusted with powders. I did quite a lot of sponge chipping and wearing using black, raw umber and red oxide. I may have slightly over done this part so my cargo half track does look like he has transported a lot of cargo. The only decals to add were number plates on the front and back. To finish it all off i added plenty of earth and sand powders.

All I can say if you can find a MACO kit anywhere you should buy at least one just to check them out. I hope maybe someone will pick up production again as they really are top notch.

Thank you eBay!

~ Colonel Mustard ~ 3 Comments

Not anything new finished but just a shout out to the fantastic candy shop that is eBay. A nice lady in Canberra was selling off up to 300 model kits she said were gathering dust in her roof. I am not sure why so many, or maybe some of us just end up with a roof full of kits and don’t complete them in our life time. I can see that happening to be honest.

I picked up three vintage Esci kits for less than $10 each. In perfect condition even though they look like kits from the 1980s! They even have that musty old library book smell to them. I love the smell of old library books in the morning. The parts are all wrapped in plastic still, although the decals look as if they curled up and died a while back. So I added more German armour to my growing pile of kits!

My favourite thing was in the instructions, which really showed the age of these kits. To bend the towing cable to fit to your model the instructions instruct you to use a lit cigarette to heat and bend the plastic. You couldn’t do that these days. That was back when Steve McQueen smoked and it was cool. And it didn’t kill you. The good old days.

Anyway check out the illustration in the instructions. Brilliant. I am off to buy a pack of Benson and Hedges. Not sure they sell them in Australia. If they do Malcolm Turnbull is probably smoking one right now………

 

Roden 1/72 German Sd Kfz 231 Eight Wheeled Armored Car

~ Colonel Mustard ~ 2 Comments

 

 

 

 

 

 

 

Another German vehicle finished this week, but this time one of their excellent eight wheeled armoured cars. This kit is from Roden, who do a good range of all the eight wheeled armoured cars and other lesser known vehicles. I bought this one from my friends at Metro Hobbies. Its a funny looking vehicle but will come in very handy for reconnaissance and scouting missions.

The kit is fun to build with most of the challenge coming in building the under carriage. The wheels and axles and suspension are done in this soft black plastic which I found quite tricky to work with. I manage to snap one axle without much effort, and found it difficult to get the wheel alignment nice and straight. Four wheels each side means there is a fair bit of aligning to do. Apart from that I lost a light to the carpet monster and struggled a little with the mirrors and other bits on the hull.

On reflection I think I should have painted this German grey and then done some highlighting to try and pick out more of the details on the vehicle. Doing a green camo stripe type thing seems to lose a lot of the detail and leaves him looking a bit boxy and flat. Anyway I have two more versions of this eight wheeler in the box so next time I will try something different.

Apologies for the fuzzy photos, blame my crappy camera phone……….

 

 

Dragon Models 1/72 StuG.III Ausf.F

~ Colonel Mustard ~ 4 Comments

I completed another Dragon StuG kit this week. It coincided with another delivery from Dragon Models in the USA. I have found them a great source for cheaper Dragon kits and if you buy three or four kits the postage from the US to Australia is only USD 12. Great value I think. They always have discounted kits and promotions on their website, so its well worth checking out. You can usually find stuff at USD 8-10 per kit which is a bargain I think for Dragon Kits. Have a look at Dragon Models USA

So onto my latest StuG kit. Its one of the new Dragon quick build models, so very easy to put together. The tracks are one piece affairs which fit around the sprocket and drive wheels. The whole kit has minimal pieces, and being a turret less tank, even fewer than normal. I still feel a little disappointed with such an easy, fast build for a Dragon kit, but the end result is still a very nicely detailed vehicle. I guess I was happy to spend more time on the painting and decorating this time. If you can find these type of kits for less than USD 10 then I think its good value. If you want a more complicated and challenging model I would be buying Trumpeter or Unimodel versions.

I kept this one a plain dunkelb yellow, but tried out some more chipping affects with a sponge. I used a black, a brown and a rust colour, and ended up overdoing the chips. I think its very easy to over do it. So I painted over some of the panels with more dunkelb and it seemed to fix the problem. Every where I read that with chipping and scratching less is always more! I think I proved a point. Lots of mud and dirt and dust with various powders and pastes was added. I then lined up my new StuG with two other friends (one a Trumpeter kit and the other another Dragon). Nice looking unit read for action.

 

 

 

Dragon Models Pz.Kpfw.IV Ausf.F2 (G) in 1/72 scale

~ Colonel Mustard ~ 1 Comment

Dragon Models in the USA had a 40% off sale back on Superbowl Sunday and I could not resist picking up some more kits with such a big discount! Some German big cats that came out at USD 6 a kit with such a decent discount. If you buy four kits from the USA the shipping is still only USD 18 total to Australia so it ended up being a great shopping deal. Now Dragon kits are usually a treat for me as you can pay more for them but it’s worth it as the complexity and detail can be considerably better than other model producers. This particular kit Dragon have aimed at simplifying everything, and its a bit of a disappointment to be honest.

They have started doing the wheels and tracks as one piece parts that you just add onto the lower hull onto the drive and sprocket wheels. The number of parts has been drastically reduced so the model can be built in really quick time. So they are definitely aiming for more of a wargamers’ market I think. The detail is nice but its all moulded on. The Panzer IV is a simple tank anyway, so I found this build a bit easy and the tank came out really plain. As a direct comparison I had just finished my Hasegawa Jagdpanzer kit which was much more of a challenge and had far better detail.

You can see I have put my Dragon Panzer next to my other Panzer IVs to complete the troop. The other kits are two Armourfast and one Esci. There is no difference between the Dragon Kit and the Armourfast ones, except perhaps the track and wheel detail is better on the Dragon one. The Esci kit is a real pain to build (for pain read challenge), but in hindsight comes out the best, with its cool side skirts and extra armour. Pricewise I would only be buying this Dragon kit if you can find a super deal at USD 6-8 per kit, otherwise you may as well just buy cheaper quick build kits from Armourfast or Plastic Soldier Company.

Photos follow with the Dragon kit on its own, plus hanging out with his troop buddies. The other Panzer IV kits are detailed in other posts on my blog. I think I will try a Hasegawa Panzer IV next and maybe get another Esci/Italeri one just for the hell of it!