One of my favourite, if not top of the charts, World War Two vehicles is the White Scout Car. So my quest to find one in plastic kit form in 1/72 scale was an important one. In the whole world there is not one company now that makes this vehicle in plastic kit form. Esci, now Italeri, no longer make this kit, even though i think they do still have pictures of it on their web site. So my quest turned to the internet as usual. Thank you eBay for the seller of this old kit for only about five pounds. I would have paid more for sure as it really seemed to be the only available kit in the known world. So i was a happy chappy when this turned up on my doorstep. I think this kit must have been years old judging by the box, but inside everything was still sealed in its plastic bag. Only the decals were unusable, but that didn’t matter as they were French and Russian anyway.

My Scout Car was going to be Allied/British. The kit build was great, a pleasure to make, all parts fitted nicely and i had no issues. The only thing wrong with this model was the rear axle sits too far forward resulting in the wheels not being central within the wheel arches. This annoyed me enough that i had to cut the rear axle and suspension off the chassis and move it maybe half a millimetre to align the wheels centrally. That was the only problem i found. The kits comes with two machine guns on the back, a 0.50 and 0.30 calibre, one on each side, and some stowage. I added a bit more from my supplies and also added a British driver from AB figures. The decals came from spares. I always base my wheeled vehicles, no one likes a broken axle. The finished scout car was given the usual olive drab treatment with a dark brown wash, highlights, and then some weathering powders. I might add some other crew or commander at some point, we shall see.

I do have a couple of metal and resin versions of the M3, which i may make as a comparison. And the chances of finding another plastic M3 kit are about as good as England winning a game in the Ashes……….

Colonel Mustard has been off line for a while due to an unfortunate battle with a local Australian spider, which he soundly lost. So after a month long fight with serious pain and immobility i am finally recovering. It was a war against neurotoxin that i couldn’t win!

So onto my latest Sherman tanks for my British forces. I needed to build up my Shermans to get to a full three troops. So i picked up a couple of boxes of Armourfast Shermans from Hannants in the UK, plus a Unimodel Sherman from my favourite Ukrainian hobby store. The Armourfast tanks are amazing value at 6.25 GBP for two. They are about as simple a kit as you could get, you can count the number of parts on one hand. That said the detail is average, but what do you expect for such a cheap price? If you are prepared to dress them up with some extras they can really turn into a great little wargaming tank. I added some tools, some lifting rings, headlights plus spare tracks and stowage. Oh and of course an aerial. You do not get decals with the kits, so i used some Canadian markings i had from The Plastic Soldier Company. Once you have tarted up your Armourfast kits they really turn out well. If you want to bulk up your tank regiments i cant recommend them highly enough.

The Unimodel Sherman is a proper model kit. I really enjoy building Unimodel kits. Lots of parts, fun to build, but definitely a challenge. Detail and end result was definitely better than Armourfast. I only added some stowage and an aerial. The kit comes with some very tricky PE parts. I managed to ping the headlight protectors across the room never to be seen again and had to make my own out of some thin wire. So don’t try this kit if you have deep carpets……. losing bits is a risk. Unimodel gives you some cool decals so I called this Sherman “Comet”. The only struggle was fitting the top hull to the bottom which left a huge gap at the front. So i had to file down parts of the lower hull around the front wheels in order to get it to fit. I would leave the front part of the hull off the lower hull section and do a dry run first before gluing as you may have the same problem.

All the tanks got the usual olive drab paint job with some dirt and dust and mud. Fun times.

I have continued building up my British forces this week finishing off another troop of Cromwell tanks. In 1/72 scale plastic the Cromwell is not well supplied. You can build an Airfix one in 1/76 scale, but that’s going to be too small for me. Armourfast make some very simple but very cheap kits ($10 for two), but if you want something with a bit more detail the only option is the Revell Kit. And what a great little kit this is. The best value i found for these was from Hobby Easy in Hong Kong for $16-17 a kit. So significantly more expensive than the Armourfast kits but much more of a challenge and the end result is worth it.

I bought  two of them to make up two thirds of my next Cromwell troop. They are great models, Revell kits seem to be consistently good. Detail is fine and the kit is a challenge. Tracks are excellent link and length and a huge improvement over the Armourfast kit. I particularly like the headlight guards on the front of the tank. If you need some Cromwells for your British army in Normandy you really need to go and pick up some of these awesome Revell kits.

The third Cromwell in my troop is in fact an Armourfast kit i had lying around plus the camouflage hessian kit from Black Dog. This is a resin extra with a camouflaged turret, camo netting for the front and stowage for the back. Rather than waste this on a fine Revell kit i thought i would use it with the much cheaper and less detailed Armourfast one. I had to hollow out the lower hull so the resin turret would fit. Also i had to pad out the front camo netting with my own concoction of bandage and tea leaves. Which was the same recipe i used for my camo nets on the stowage at the back of the other two tanks. The Armourfast Cromwell is slightly wider and taller than the Revell Kits but not enough that makes them incompatible. Oh one thing about this Black Dog turret is that they put the turret MG on the wrong side. So i had to switcheroo the main gun and the MG so it matched all my other Cromwells.

Other stowage is from all sorts of places including Value Gear and Sgts Mess. The Revell decals are excellent. You have to paint in white the little circle in the rooftop Allied star. You also get the option for the hedge cutters at the front of the tank. I read somewhere that Cromwells didn’t actually use these, but who cares i think they look cool. I will be adding some AB Figures tank crew, who are in the painting queue, in due course.

I had a lot of fun with these kits. If you need Cromwells get some Revells!

This classic British tank was on sale at BNA Model World for $12.50 a few months back so could not resist but pick up a couple of them. That’s just too good a bargain to pass up for a couple of Dragon kits. I needed some more Churchills to add to my Plastic Soldier Company versions and make up a full troop. Now i have four including the large calibre AVRE for support.

These are excellent kits and pretty easy to put together compared to some Dragon kits which can be fiddly. The best thing about them is the running gear which comes in a few pieces for each side but with the wheels already connected in two halves. So you don’t spend hours making and gluing individual wheels and then trying to align them. As we all know the Churchill has as many wheels as a centipede has legs. Well nearly as many. The detail is better and more delicate than the PSC Churchills. You can model the hatches open or closed, which allows you to add some tank crew. In my case i added a couple of excellent fellow from AB Figures, one relaxing against his hatch, the other carrying some kind of map case ready to get on the CB radio.

The only real problem i faced with this kit (both times i made it) was trying to get the upper hull to fit on the bottom hull straight at the back. Either side at the back remained at a funny angle. Not the end of the world and i probably need to get some clamps or something to keep it glued in place for longer. You get some decals with the kit but i used some other PSC decals i had. This gives me plenty of Churchills now. The only ones i had as a kid were from Airfix, and these Dragon models are certainly a great improvement on them. There is an Esci model Churchill out there which i will try and get my hands on too sometime.

The Sherman Firefly is a very poorly catered for tank model in 20mm. There very few options for the wargamer in 1/72 scale. Armourfast produce some very basic kits, Unimodel have a firefly i haven’t built, and I think Dragon models do a Firefly which i have never seen available anywhere. The Plastic Soldier Company produce the best option in this scale, and i was lucky enough to pick up a box of these crucial tanks while i was visiting PSC HQ in Henfield in October. They come in the usual PSC style in a box of three and are great value for money costing around $22 Australian per box.

Very easy to build, they come in about a dozen pieces, and can be put together in quick smart time. I like having a change from the more complicated builds. The tracks come in a top and bottom section that glue to the running gear. They have a really nice heavy sag to them on the top, an effect which is hard to get with vinyl one piece and link and length tracks. You need to drill out the end of the barrel for realism. Turret hatches can be open or closed so you can add one or two tank crew and commanders. I used my favourite AB Figures tank commander drinking a cup of tea. It was fun to even paint his army issue enamel tea mug with a blue rim. Detail is nice and chunky as usual from PSC. After building fiddly Dragon models with all their delicate bits this made a nice change for a bit of rough and tumble. I added stowage from various places in my spares box, plus some wire aerials and decals from all over the place. My decals are pretty random as i don’t suppose to adhere to any historical accuracy. I just use what looks good. A light weathering with various browns finishes him off. Its a great little model and i am excited to build the other two. I think some camo netting over the turret and barrel next time will be the plan.

Here is my Firefly taking up a defensive position on the edge of town.