Normandy Church scratch build in 1/72 scale

I have been busy working on my final building for my Normandy village. After hunting around everywhere looking at purchasing a church for my village it was decided that the only way to go was to build my own. So here is L’Eglise de Moutarde Forte in all its glory. I made the structure out of 3mm foam board glued together with PVA. If you use dressmaking pins to keep it all together while the glue dries that will help.

Once you have built the shell with all the window and door apertures cut out, I gave it good thick coating of plaster. I use the ready made stuff from Bunnings and just slap it on with my hands. A good sanding down with sandpaper and then I laboriously carve the brickwork using my Chinese etching tool ($10 on ebay and a few batteries later…) It helps to leave the structure apart for this stage otherwise its hard to carve your stonework into the corners. This part was very time consuming and probably took me a week or more doing some scribing every day. Tedious. But worth it. I added some buttresses for extra detail. These were foam board coated and carved as before.

Now my one problem area was the windows. Making nice arches with delicate window settings was close to impossible. After a lot of research I found a company in the USA that does exactly the right thing in exactly the right size for my project. Rusty Stumps make all sorts of modelling goodies, I think aimed at model railway people more than wargamers, but still will give you many great options for building your own stuff! Walt, who runs the place was super helpful and even posted my chosen windows to an address in the states, as we happened to be there on holiday. I bought two sheets of windows, some thicker, some thinner, and used all of them in my church. They are super thin MDF and very delicate. So I was very careful in gluing them and their accompanying frames behind the apertures I had cut, after I had scribed all my bricks. Once they were glued in securely I went around and filled any small gaps with extra plaster. The Rusty Stump windows also come with thin plastic windows to glue behind the frames if you like. I didn’t bother as I was happy enough with the effect.

The spire roof, main roof and smaller front roof are all removable. Made out of thick card on foam board supports. Then its old Christmas cards recycled to make slates glued in strips. Again, another time consuming process, but worth the effort.

The whole thing was base coated in grey primer. Just make sure you have given any foam board edges a coat of PVA glue otherwise you may find spray paint dissolving stuff. I used various light brown, light grey, yellows and ochres for the stone work, and paynes grey in various shades for the roof. The roof was also given small stippled patches of yellow ochre and pale green for mossy bits, plus some weathering powders streaked in brown and earth.

Now he is finished and I can actually get on and set up my whole village ready for battle.

10 thoughts on “Normandy Church scratch build in 1/72 scale

  1. As Pete says, impressive! The stonework, slates and windows all look great! Well done with this, it really looks the part and makes a great centrepiece to the town! If I could have done that, and I’m pretty sure I couldn’t, it would have taken me months!

    Like

  2. This looks awesome. Am looking to do a similar build but unsure of dimensions. Hw did you decide on your measurements and would you mind sharing them?

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s